RAVENOL HCL SAE 5W-30 is a synthetic low friction motor oil with CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection.
RAVENOL HCL SAE 5W-30 achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.
Because of a considerable fuel saving RAVENOL HCL SAE 5W-30 contributes to protect the environment by reducing the emissions.
RAVENOL HCL SAE 5W-30 minimizes friction, wear and fuel consumption with excellent cold start characteristics.
Suitable for extended oil change intervals where recommended by manufacturer.
Application Note
RAVENOL HCL SAE 5W-30 is an universal fuel-efficient engine oil, a top-quality product for petrol and passenger car diesel engines with or without turbochargers in passenger cars and vans.
Characteristics
- Fuel economy in part and full power operation.
- Very stable and excellent viscosity behaviour.
- Excellent shear stability.
- Excellent cold start characteristics.
- A safe lubricant film at high operating temperatures.
- Excellent detergency and dispersing properties.
- High wear and corrosion protection, high oxidation stability.
- Protection against foaming.
- Excellent detergent- and dispersant characteristics.
- Longlife characteristics through high oxidation stability.
- Catalyst suitability.
Technical Product Data
Property | Unit | Data | Audit |
---|---|---|---|
Density at 20 °C | kg/m³ | 850,0 | EN ISO 12185 |
Colour | braun | VISUELL | |
Viscosity at 100 °C | mm²/s | 12,2 | DIN 51562-1 |
Viscosity at 40 °C | mm²/s | 72,3 | DIN 51562-1 |
Viscosity Index VI | 168 | DIN ISO 2909 | |
HTHS Viscosity at 150 °C | mPa*s | 3,57 | ASTM D5481 |
CCS Viscosity at -30 °C | mPa*s | 5591 | ASTM D5293 |
Low Temp. Pumping viscosity (MRV) at -35 °C | mPa*s | 24.100 | ASTM D4684 |
Pourpoint | °C | -39 | DIN ISO 3016 |
Noack Volatility | % M/M | 8,6 | ASTM D5800 |
Flashpoint | °C | 238 | DIN EN ISO 2592 |
tbn | mg KOH/g | 10,2 | ASTM D2896 |
Sulphated Ash | %wt. | 1,31 | DIN 51575 |
All indicated data are approximate values and are subject to the commercial fluctuations.