RAVENOL HES SAE 0W-30 is a synthetic motor oil with CleanSynto® Technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. It is based on additives with low ash content for use in modern passenger car with diesel and gasoline engines with excellent cold start characteristics, low oil consumption and reduced pollutant emissions. This oil will increase the DPF and TWC life.
RAVENOL HES SAE 0W-30 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking.
By significantly reducing fuel consumption, RAVENOL HES SAE 0W-30 helps to protect the environment by reducing emissions. It minimizes friction, wear and fuel consumption with excellent cold start characteristics. Extended oil change intervals according to the manufacturer’s instructions.
Application instructions
RAVENOL HES SAE 0W-30 is a universal fuel economy, especially designed engine oil for modern gasoline and diesel engines with and without turbo charger in passenger cars and vans with extended oil change intervals of BMW, PSA, FIAT, IVECO and Jaguar Land Rover. Extends the lifespan of the particle filter.
Due to its special formulation, RAVENOL HES SAE 0W-30 is ideally suited for use for indicated OEM requirements.
Characteristics
- Fuel economy in part and full power operation
- Excellent cold starting characteristics also at low temperatures
- A safe lubricant film at high operating temperatures
- Long service life due to high oxidation stability
- Low evaporative tendency, so lower oil consumption
- No deposits in combustion chambers, in the piston ring zone and valves because of oil conditioned
- Neutrality towards sealing materials
- Extended oil change intervals to protect natural resources
- Excellent protection against corrosion, wear and foaming
Technical Product Data
| Characteristics | Property | Data | Audit |
|---|---|---|---|
| Colour | gelbbraun | VISUELL | |
| Sulphated Ash | %wt. | 0,73 | DIN 51575 |
| tbn | mg KOH/g | 9,1 | ASTM D2896 |
| Viscosity at 100 °C | mm²/s | 10,2 | DIN 51659-2 |
| Viscosity at 40 °C | mm²/s | 55,4 | DIN 51659-2 |
| Viscosity Index VI | 174 | DIN ISO 2909 | |
| CCS Viscosity at -35 °C | mPa*s | 6100 | ASTM D5293 |
| Density at 20 °C | kg/m³ | 841,0 | EN ISO 12185 |
| Flashpoint | °C | 232 | DIN EN ISO 2592 |
| HTHS Viscosity at 150 °C | mPa*s | 3,14 | ASTM D5481 |
| Low Temp. Pumping viscosity (MRV) at -40 °C | mPa*s | 21.300 | ASTM D4684 |
| Noack Volatility | % M/M | 9,3 | ASTM D5800 |
| Pourpoint | °C | -48 | DIN ISO 3016 |










